3003h18 aluminum foil for aluminum honeycomb core

Aluminum honeycomb has been widely used in building exterior wall decoration, furniture, carriages and other fields due to its many advantages such as light weight, high strength and high rigidity. In the three-layer structure of honeycomb composite board, the middle layer is a hexagonal honeycomb core, which is usually made of 3003 aluminum foil as raw material. Aluminum foil is an important material, and its performance has a great influence on the quality and service life of the honeycomb core.

3003h18 honeycomb aluminum foil has high strength

Using 3003-h18 aluminum foil as the aluminum foil substrate for honeycomb core, the strength is much higher than 1100 aluminum foil. The finished product is not easy to deform, the end face is flat, the edge has no burrs, and the surface flatness is high after bonding and compounding.

3003 Honeycomb Aluminum Foil

Mingtai Aluminum's 3003h18 honeycomb aluminum foil is cleanly degreased to ensure the later gluing effect.

The upper and lower base plates, panels and honeycomb cores of the aluminum honeycomb panel are bonded into an integral rigid structure through adhesives. Factors affecting the overall quality include the material of the upper and lower base plates, the material of the honeycomb core, the node glue and the specifications of the honeycomb core. To ensure the later gluing effect, the surface of the aluminum foil is required to be cleanly degreased. Mingtai Aluminum uses special degreasing equipment and imported cleaning fluid to ensure that the surface of the aluminum foil is free of oil, the glue is firmly bonded, not easy to fall off, and has a long service life.

Mingtai Aluminum's 3003 aluminum foil is customized and delivered quickly

Mingtai Aluminum can produce 3003 aluminum foil with a thickness range of 0.02-0.2mm and a width of 200-1600mm. It accepts orders of 5-5000 tons and delivers in 7-35 days.